For the purposes of this, we will assume that the codeplug has nothing in it – depending on your starting point, you’ll need to do more or less of the steps below. The example is for the local talkgroup on the Carnane repeater. Time to programme a digital channel This is what you need to do to programme add digital channel into the codeplug. Then use the 'Save' option under the 'File' menu to save the file. To do this, use the 'Read from radio' option under the 'Program' menu at the top of the screen. Keep it for as long as you have the radio and use it if you ever get stuck and need a known starting point to go back to. Before you do anything, it's always a good idea with any professional radio equipment to read the current programming and save the resultant codeplug somewhere safe. Once the codeplug has been uploaded, the radio will reset and will operate on all the local repeaters. If you have a mobile radio, ensure that the switch on the programming lead is set to the “CPS” position. To programme the radio, use the “Write to radio” option under the “Program” menu. The ID number, “Radio ID (digital)”, can be found under the “Conventional ->Digital Common” menu. The “Radio Alias” should be set to your callsign and can be found under the “Common ->Setting” menu. If you use a downloaded codeplug, then at least change the “Radio Alias” and “DMR ID” to match your details. #HYTERA DMR USB DRIVER UPDATE#Once the firmware update is complete, then the programming software can be used to programme your radio either with your own data or someone else's codeplug. If you have a mobile radio, change the switch on the end of the programming cable to the “CPS” position before turning back on to allow programming. After upgrading, turn the radio off and back on. Select “USB1” in the “port” drop down menu and click “upgrade”. Once in the download mode, start the upgrade software. For the MD785, set the switch on the end of the programming cable to the “DL” position and turn on the radio.įor a portable radio, hold the PTT and the orange button on top whilst turning the radio on. To perform the firmware upgrade, you need to put the radio into its programming mode. If your radio already has that, then the program will tell you. Use the firmware update program to load the latest firmware. To ensure that all the features of your radio are available. #HYTERA DMR USB DRIVER SERIAL NUMBER#If prompted, enter the serial number in the “SN.TXT” file. #HYTERA DMR USB DRIVER INSTALL#To install the CPS, un-compress the downloaded archive file and run “setup.exe”. #HYTERA DMR USB DRIVER HOW TO#There is a detailed user guide PDF file included in the archive file which includes all the installation steps as well as how to perform the upgrade. To install the upgrade package, un-compress the downloaded archive file and run “setup.exe”. There is a detailed user guide PDF file in the archive file. Answer OK to any questions that Windows asks during the installation process. To install the driver, un-compress the downloaded archive file and run “setup. There’s a different driver for the PD365.īefore you try to do anything else, like plug in the programming cable, install all of those things. The one you want depends on your version of Microsoft Windows. The V5.30 USB driver works for most radios, there are 64 and 32 bit versions. They are common over most of the Hytera range. So long as you don’t have a PD365, then the V7 CPS and firmware files will work for you.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |